PRODUCT DESCRIPTION
Bottomcoat is a cruising antifouling designed specifically to provide good antifouling protection in all but the heaviest fouling challenges.
* Season long antifouling protection
* Suitable for application several weeks before immersion.
* Contains an organic booster to improve antifouling performance
PRODUCT INFORMATION
Colour YBB003-Black, YBB005-Blue, YBB007-Navy, YBB009-Red
Finish Matt
Specific Gravity 1.51
Volume Solids 45%
Typical Shelf Life 2 yrs
VOC (As Supplied) 488 g/lt
Unit Size 2.5 Lt
APPLICATION AND USE
Preparation PREVIOUSLY ANTIFOULED SURFACE:
In Good Condition: Rinse with fresh water and allow to dry. If old antifouling is incompatible or unknown, seal with Primocon.
In Poor Condition: Use Interstrip to remove all traces of antifouling.
BARE GRP: Gelshield 200 for osmosis protection, or Primocon.
STEEL/IRON: Prime with Interprotect or Primocon.
LEAD: Etch Primer followed by Interprotect or Primocon.
WOOD: Preserve, if required, with Intertox.
Method Apply 2 coats per season on the hull. 3 coats are required on the leading and trailing edges, waterline, rudder and keel. This is important for best performance.
Coverage (Theoretical) - 9.00 (m²/lt)
PLEASE NOTE:
THIS PRODUCT CANNOT BE SHIPPED VIA AIRFREIGHT AND IS THEREFORE ONLY AVAILABLE TO PURCHASE IN THE UK, IRELAND AND EUROPE.
COLOUR CHARTS ARE SUPPLIED AS A GUIDE ONLY AND MUST NOT BE RELIED UPON DUE TO THE OBVIOUS DIFFERENCES IN HOW EACH INDIVIDUAL COMPUTER/MONITOR PORTRAYS THEM.