PRODUCT DESCRIPTION
Offers protection in the highest fouling conditions where a hard, scrubbable antifouling is required. Ideal for fast powerboats.
* High strength, hard antifouling
* Hard, scrubbable finish to allow clean-off if needed
* Suitable for burnishing to provide a smooth finish
* Smooth finish for maximum slip through the water
* Contains Biolux technology for sustained antifouling protection
PRODUCT INFORMATION
Colour YBA303-Dover White, YBA323-Green, YBA331-Light Blue, YBA333-Blue, YBA341-Red, YBA353-Navy, YBA363-Grey, YBA366-Princess Grey, YBA393-Black Please check availability of full colour range. Not all colours are available in every country.
Finish Matt
Specific Gravity 1.5
Volume Solids 45% average
Typical Shelf Life 2 yrs
VOC (As Supplied) 485 g/lt
Unit Size 2.5 Lt
APPLICATION AND USE
Preparation PREVIOUSLY ANTIFOULED SURFACE:
In Good Condition: Rinse with fresh water and allow to dry. If old antifouling is incompatible or unknown, seal with Primocon.
In Poor Condition: Use Interstrip to remove all traces of antifouling.
PRIMING: All preparation for bare substrates is covered on the appropriate primer datasheet.
BARE GRP: Gelshield 200 for osmosis protection, or Primocon.
STEEL/IRON: Prime with Interprotect or Primocon.
LEAD: Etch Primer followed by Interprotect or Primocon.
WOOD: Preserve, if required, with Intertox. Prime with Interprotect or Primocon.
Method Apply two coats per season.
Coverage (Theoretical) - 10.50 (m²/lt) by brush
(Practical) - 9.40 (m²/lt)
THIS PRODUCT CANNOT BE SHIPPED VIA AIRFREIGHT AND IS THEREFORE ONLY AVAILABLE TO PURCHASE IN THE UK, IRELAND AND EUROPE.
COLOUR CHARTS ARE SUPPLIED AS A GUIDE ONLY AND MUST NOT BE RELIED UPON DUE TO THE OBVIOUS DIFFERENCES IN HOW EACH INDIVIDUAL COMPUTER/MONITOR PORTRAYS THEM.