| |
Polished stainless steel swan neck cable gland.
Ideal way to pass multi cables through the deck, in many cases with connector plugs attached.
I.D 30mm. Height(from Deck)130mm. Width (across Sw...» more
info
|
1m Stainless steel whip antenna for mast
mounting complete with stand off bracket.
Bandwidth 156-163Mhz
impedance 50ohm
Weight 350g...» more
info
|
Superb Value sportsboat/fishing boat antenna.
GRP flexible whip antenna with nylon ratchet base, cable and plug. Easily folded down when towing.
Vhf antenna with natural fiberglass finish.
Freq...» more
info
|
Nylon Flange Mount
White nylon, 25mm (1”) high mount
* 70mm (23/4”) diameter base
* Suitable for moderate duty operations
* Low-profile
Cable slot provided
...» more
info
|
Nylon Ratchet Rail Mount
Swivel type nylonl rail mount vertical, horizontal or slanted rails
* Ratchet action for antenna fold-down
* Easy installation on 22mm (7/8”) and 25mm (1”) ra...» more
info
|
The DR1 cable gland can be drilled in the same way as the M Series glands, to accept a variety of cables. Following the instructions provided, simply drill holes of appropriate diameter through the 12...» more
info
|
Economy Stainless Steel Rail Mount
Versatile! Complete with nylon adapters
* This clever design allows a neat fit to 22mm (7/8”), 25mm (1”), and 32mm (11/4”) rails
* Fits square or ro...» more
info
|
Our Code: MD162200 Complete stainless steel masthead antenna with integrated Wind indicator. Lightweight and ultra slim with solderless connector and PL259 plug.180mm cranked nylon bracket and 20m of...» more
info
|
Replacement Hawk Wind Indicator for V-Tronix masthead aerial....» more
info
|
Our Code: MD162208 Complete stainless steel masthead antenna. Lightweight and ultra slim with solderless connector and PL259 plug.180mm cranked nylon bracket and 20m of RGS8 cable.
* Impedance...» more
info
|
Our Code: MD162236 The V-Tronix Rib Raider is designed for rough usage which makes it the ideal antenna for Rigid Inflatables, It has a coiled section for resilience, and although it has a reduced le...» more
info
|
The V-Tronix ARMNT Stainless Steel Ratchet Mount is a versatile, free-standing mount with a four-way ratchet design. It can be used for mounting to vertical or horizontal surfaces - deck or bulkhead -...» more
info
|
Solid Nylon Ratchet Mount
Four-way ratchet design with handle, for deck or side mounting.
* Standard 1” x 14TPI thread
* Not for use with antennas longer than 2.4m in self-supporting ...» more
info
|
Deck plug and socket for RG-58 coaxial cable with N Type connectors, shroud and screws
* Shroud and screws included
* Complete with 2 protective caps
* Full fitting instructions inclu...» more
info
|
VHF/AM/FM broadcast band splitter, with VHF and car radio
plugs.
The splitter uses the VHF antenna to provide AM/FM reception,
without degrading the performance of the antenna at VHF
frequencies.
...» more
info
|
The split seal range of single cable glands, allows a cable with a fixed connector fitted to be passed through the deck, without the need to cut the cable. The glands have a tapered body and seal. The...» more
info
|
Our Code: VTHELIFLEX Ultimate low windage solution for sailing yachts, Only 250mm high with its Wide beam width to increase range when heeled.
Comes supplied with a 18m cable, connector and mast b...» more
info
|